Highlights Offline Workflow QGIS Plans Tutorials Open Web

Tairu Drone · beta

The team's drone on the expedition map.

Tairu Drone is an Android app for the DJI drone's controller. It sends the video and the telemetry to Tairu Maps: the team sees the drone on the map and the live video, and the pilot flies with the expedition's layers over the image.

Tairu Drone is a beta, still under testing.

It may have defects we do not know about, change from one version to another and stop working, including as a result of a decision by DJI about its SDK.

  • Test it on the ground and in a training flight, in an open area, with each aircraft and each controller, before using it in an operation.
  • Keep your drone's DJI app installed and up to date: it is your plan B.
  • Do not use Tairu Drone as the only means in an operation in which a failure of the app could endanger lives or third-party property.
  • The Modo piloto (Pilot mode) writes settings to the aircraft, which remain in effect afterwards, in the DJI app as well. Check them before each flight.
  • The layers over the video and the marked points are approximations: do not use them to avoid obstacles or to fly the aircraft.
  • Since 0.2.6, it tells you when there is a new version and installs it when you ask, never with the aircraft connected.
  • The flight is the responsibility of the pilot in command and of the aircraft operator, who must comply with the aeronautical, telecommunications and data protection regulations of the place where the flight takes place.
Bridge deviceAndroid 7.0 or newer, 64-bit
In Tairu MapsVersion 1.0.91 or newer, Realtime plan (the 7-day free trial qualifies)
PriceFree during the beta
App languagePortuguese only, whatever the language of the device

What it does

What the drone sees, the team sees on the map.

Team

Video and drone on the map

The paired devices with Tairu Maps on the same network see the live video and the drone's position on the expedition map.

Pilot

Layers over the video

In the Modo piloto, the controller shows the expedition's points, lines, areas, names and emergency points over the camera image.

Records

Marked points

The pilot marks a point on the video, and it becomes a record with a photo in the expedition.

The bridge does not see the chat, the member list or the Emergency Card. It receives the expedition's visible layers, to draw them over the controller's video, and, from the pilot's device, the profile's name and the expedition's.

Drones and controllers

It only works with the drones that the DJI SDK accepts.

A "not tested" model may not work, or may work only in part.
StatusDrones and controllers
TestedMavic 3E with DJI RC Pro Enterprise · M30T with DJI RC Plus
Accepted by the DJI SDK, not testedMavic 3T, 3M and 3TA with DJI RC Pro Enterprise · M30, M300 RTK and M350 RTK with DJI RC Plus · Matrice 4E, 4T, 4D, 4TD and Matrice 400 with DJI RC Plus 2 Enterprise · Mini 3, Mini 3 Pro and Mini 4 Pro with an RC-N controller connected by cable to an Android phone (the Mini 4 Pro, only with the RC-N2)
Does not workDJI RC and DJI RC 2 controllers (without "Pro") and the Smart Controller · drones without an SDK, such as Mini 2, Mini SE, Air 2S, Air 3 and 3S, Mavic 3, 3 Classic and 3 Pro, Mavic 4 Pro, Mini 5 Pro, Neo, Avata and Phantom 4

How the bridge works

The bridge stays on the controller; Tairu Maps, with the team.

Tairu Maps does not run on the controllers with a screen: they do not have Google Play.

Controller with a screen and paired phones (tested)

The bridge runs on the controller with a screen; Tairu Maps, on a phone or tablet on the same Wi-Fi network, the one at the site or the phone's hotspot. One device is the pilot, which sends the layers and receives the points; the others are observers, which see the video and the drone on the map.

Android phone with an RC-N controller (not tested)

The bridge and Tairu Maps run on the same phone, connected to the controller by cable.

Install

From the page to the first training flight.

  1. Tick the acceptance box below and download the APK, preferably on the device itself. On a controller without a browser, copy the file by USB cable or microSD card.
  2. If you like, check the file's SHA-256 against the one published here.
  3. Open the file and allow the installation of apps from this source, if Android asks. On a phone with Google Play, Android may ask for extra steps to install an app from outside the store. DJI's controllers with a screen do not have Google Play.
  4. Open Tairu Drone with internet access: read the beta notice, the Terms of Use and the Privacy Policy, and accept. Then accept the location and phone permissions, which the DJI SDK requires, and the notifications permission. The first time it opens, DJI activates the app over the internet.
  5. Close the DJI app: only one app uses the aircraft at a time.
  6. On the controller: turn on the phone's hotspot and connect the controller to it. Turn on the drone: the bridge turns on by itself. The QR is at the top of the Quem está conectado (Who is connected) card. In Tairu Maps, with the expedition open: ⋮ → Drone (beta) → Scan the QR. For one more phone, connect it to the same network as the controller and tap Conectar outro celular (Connect another phone): the QR opens in a window.

To update, tap Baixar e instalar (Download and install) on the bridge's screen, or download the new version here and install it over the old one: the stored flights and the pairing are kept.

Security and privacy

Nothing goes through a server of ours.

The pairing QR is a secret

Whoever has it can watch the video and exchange messages with the bridge. Show it only to the team and tap Renovar segredos (Renew secrets) when the team changes.

Unencrypted local network

The video and the layers are not encrypted on the local network. Use your own network or the phone's hotspot.

No account and no metrics

What the bridge processes stays on the device and leaves it only for the devices you pair, for DJI, through the SDK without which the bridge cannot talk to the drone (the bridge declines DJI's "product improvement"), for OpenFreeMap, which provides the Modo piloto map, and for this website, which the bridge asks which version is published and from which it downloads the new version, when you ask.

Flights stay on the device

The bridge keeps the 5 most recent flights, and the video only if you turn on Gravar o vídeo dos voos (Record flight video). Download the bridge only from this page, or through the bridge itself, which downloads from here and checks the SHA-256: Tairu Maps never downloads or installs Tairu Drone.

Download Tairu Drone (beta)

Version
0.2.13
Date
15/11/2026
Size
188 MB
Requirements
Android 7.0 or newer, 64-bit
SHA-256
0be166f92a2046ce49a740363a861dae868929d94556d32477f7340d709fb400

Terms of Use and Privacy Policy 1.1, of November 3, 2026: the bridge now tells you when there is a new version and installs it when you ask (Policy, section 3.8). If you come from 0.2.5 or earlier, the new version asks for your acceptance again when it first opens.

Report problems to contato@csminovacao.com.br. If you like, attach the file from Exportar para análise (Export for analysis), on the bridge's screen: it carries the telemetry of the stored flights, with the positions, and the video of those that were recorded. If it is too large for e-mail, send a sharing link.